page . 1 june 14,2014-rev.01 pjet3v3ts voltage ipp 3.3 volt 5.5 ampere single line tvs diode for esd protection portable electronics ? small package for use in portable electronics ? suitable replacement for mlv?s in esd protection applications ? low clamping voltage and leakage current ? lead free in compliance with eu rohs 2011/65/eu directive ? green molding compound as per iec61249 std. . (halogen free) maximum ratings and electrical chatacteristics ? case : sod-523 plastic ? terminals : solderable per mil-std-750,method 2026 ? approx weight : 0.0014 grams ? marking : qn applications features 1 2 cathode anode electrical chatacteristics notes : 1. non-repetitive current pulse. 2. mounted on copper pads to each terminal. 3. peak pulse power waveform is 8/20 ? s. 4. a transient suppressor is selected according to the working peak reverse voltage (v rwm ), which should be equal to or greater than the dc or continuous peak operating voltage level. parameter symbol conditions min. typ. max. units reverse stand-off voltage (notes 4) v rwm ---3.3v reverse breakdown voltage v br i br =1ma 5.25 - 5.95 v reverse leakage current i r v r =3.3v - - 0.5 ? a clamping voltage (8/20 ? s) v c i pp =5.5a - - 7.9 v off state junction capacitance c j 0vdc bias, f=1mhz - - 40 pf rating symbol value units peak pulse current on 8/20 ? s waveform (notes 1,2,3) i ppm 5.5 amps esd voltage air mode v esd 30 kv esd voltage contact mode v esd 25 kv operating temperature and storage temperature t j ,t stg -55 to +150 o c 0.20 min. 0.034(0.85) 0.029(0.75) 0.014(0.35) 0.009(0.25) 0.006(0.15) 0.002(0.05) 0.026(0.65) 0.021(0.55) 0.067(1.70) 0.059(1.50) 0.050(1.25) 0.045(1.15)
page . 2 june 14,2014-rev.01 pjet3v3ts fig.3 typical reverse characteristics fig.2 typical junction capacitance 0 10 20 30 40 50 01234 c j , junction capacitance (pf) v r , reverse bias voltage (v) 0.1 1 10 100 00.511.522.533.5 i r , reverse leakage current (na) v r , reverse voltage (v) t j = 25 c 0 5 10 15 20 25 1 2 3 4 5 6 i br , reverse breakdown current (ma) v br , reverse breakdown voltage (v) t j = 25 c fig.1 typical reverse characteristices fig.3 reverse leakage current fig.4 typical peak clamping voltage 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 55.566.577.58 ipp, 8/20 s peak pulse current (a) clamping voltage vc ,(v) fig.3 typical reverse characteristics fig.3 reverse leakage current fig.4 typical peak clamping voltage fig.3 typical reverse characteristics fig.5 8/20 s peak pulse current waveform
page . 3 june 14,2014-rev.01 pjet3v3ts mounting pad layout order information ? packing information t/r - 12k per 13" plastic reel t/r - 5k per 7" plastic reel
page . 4 june 14,2014-rev.01 pjet3v3ts part no_packing code_version pjet3v3ts_r1_00001 pjet3v3ts_r2_00001 for example : rb500v-40 _ r2 _ 00001 part no. serial number version code means hf packing size code means 13" packing type means t/r packing code xx version code xxxxx packing type 1 st code packing size code 2 nd code hf or rohs 1 st code 2 nd ~5 th code tape and ammunition box (t/b) a n/a 0 hf 0 serial number tape and reel (t/r) r 7" 1 rohs 1 serial number bulk packing (b/p) b 13" 2 tube packing (t/p) t 26mm x tape and reel (right oriented) (trr) s 52mm y tape and reel (left oriented) (trl) l panasert t/b cathode up (pbcu) u forming f panasert t/b cathode down (pbcd) d
page . 5 june 14,2014-rev.01 pjet3v3ts disclaimer ? reproducing and modifying information of the document is prohibited without permission from panjit international inc.. ? panjit international inc. reserves the rights to make changes of the content herein the document anytime without notification. please refer to our website for the latest document. panjit international inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. ? panjit international inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. ? applications shown on the herein document are examples of standard use and operation. customers are responsible in comprehending the suitable use in particular applications. panjit international inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. ? the products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify panjit international inc. for any damages resulting from such improper use or sale. ? ? since panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining.
|
